Manual de programacion aquí 
MAGELLAN
| Features | |
| Simultaneous Five-channel Reporting Offers reporting via GPRS, GSM, SMS, Voice, and traditional landline, with pre-defined communication sequences to save installation time. | |
| 2 partitions and up to 64 wireless zones | |
| Supports optional quad-band GPRS/GSM module with 2 SIM cards (GPRS14) | |
| Built-in transceiver (433 or 868 MHz) | |
| Speakerphone via GSM or landline | |
| Built-in voice and utility reporting(up to 8 telephone numbers) | |
| Two-way voice communication (via GSM or landline) | |
| 16 users and 16 remote controls | |
| 8 wireless PGMs (2 I/Os can be hardwired) | |
| 256 events buffered | |
| Supports 4 wireless sirens (SR150) | |
| Supports 4 wireless keypads (K32RF/K37), displays first 32 zones only | |
| Supports 4 wireless repeaters (RPT1) | |
| Supports 16 two-way remotes (REM2/REM3) | |
| Built-in 90 dB siren | |
| Remote firmware upgrade via GPRS | |
| Full voice-assisted remote system access via GSM | |
| High-quality sound for voice tags and menu guidance | |
| Family message center (up to 30 sec. w/ time stamp) | |
| Clock with alarm | |
 |
|
REM3
Hand-Held Two-Way Remote Keypad
| Features | |
| Compatible with MG5000, MG5050, MG6250, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher) | |
| Supports StayD | |
| System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system. | |
| Configure which partitions the REM3 arms/disarms | |
| Built-In Transceiver (433MHz or 868MHz) | |
| Independent Arm, Sleep, Stay and Off buttons and LED display per partition | |
| Control up to 6 PGMs and/or generate panics | |
| Keypad Mode: Requires code entry Remote Mode: One-touch arming / Disarming |
|
| Installer Diagnostic Mode: Partition 1 LEDs = Signal Strength Display Partition 2 LEDs = RF Interference Display |
|
| Provides visual and auditory feedback of system status | |
| Press the Status button to receive system status | |
| Label to identify remote control owner | |
| Compact, water-resistant design | |
| Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in) | |
| EN50131 grade 3 | |